What You'll Need
Polar Blast Snow Foam
£14.99
Bodywork Shampoo Conditioner
£9.99
Aqua Wax
£15.99
Step-by-Step Guide
Pre-rinse
Rinse the vehicle thoroughly with a pressure washer to remove loose dirt and debris.
Snow Foam Pre-wash
Apply Polar Blast Snow Foam with a foam lance. Leave for 3–5 minutes to encapsulate dirt.
Rinse off foam
Rinse the foam away, taking the majority of contamination with it.
Two-bucket wash
Using the two-bucket method, wash the vehicle from top to bottom with Bodywork Shampoo Conditioner.
Final rinse
Rinse thoroughly from top to bottom. Optionally apply Aqua Wax during the final rinse.
Dry
Use a clean microfibre drying towel to dry the vehicle, working from the roof down.
Pro Tips
Always wash in the shade — direct sunlight causes products to dry too quickly and can leave water spots.
Use the two-bucket method: one bucket for clean soapy water, one for rinsing your mitt. This prevents transferring dirt back onto the paintwork.
Work from the roof down — gravity is your friend. The lower panels are always the dirtiest.
Have a Question?
Our team is on hand to help with any questions about this guide or the products used.